④
⑤
③
②
①
Auto-stop function
Do not subject to shock such as
strong vibrations or by dropping it.
Doing so will result in damage or
malfunction.
Do not touch with wet hands.
This can lead to rust or damage.
Do not disassemble or modify.
This may cause injury or malfunction.
Do not short-circuit the battery.
Do not damage the battery.
Do not heat the battery.
Do not disassemble the battery.
Do not re-charge the battery.
Do not expose the battery to fire.
Do not install or store the clock within
reach of children.
Please follow to prevent battery from leaking,
heating or exploding.
Do not touch liquid leaking from the battery.
There is danger that blindness or inflammation
may occur. If it comes into contact with eyes
or skin, rinse well with tap water immediately
and seek treatment from a doctor. If it comes
into contact with clothing, please rinse with
tap water immediately.
There is a risk of injury due to accidental
swallowing of the battery or screws.
If accidental swallowing occurs, seek
medical treatment immediately.
In the case that liquid is leaking from the
battery please use rubber gloves to remove
battery and do not touch it with your bare
hands. Thoroughly wipe away any liquid
leaking from the battery with a cloth or
paper.
Do not insert the batteries in the
wrong direction.
This can cause the battery to leak or
heat up resulting in damage or injury.
Remove the battery from the clock
when not in use for a long time.
If the battery is kept in, leakage may
occur.
To avoid battery leakage or explosion,
please follow the below.
If the clock stops, either replace the
battery with a new one or remove the
battery.
Even when the clock is still working,
change the battery regularly once
per year.
Do not use the product in the places
listed below.
This may cause the product to deform, deteriorate,
or malfunction.
Locations with temperatures above +50°C (+122°F).
Locations exposed to direct sunlight. In the
proximity of fire or heat from heating appliances.
Locations where it is in direct contact with
ventilation such as cooling appliances.
Locations where the temperature is below -10℃
(10 degrees below zero) (+14℉) (The plastic part
or battery may deteriorate.)
Locations with high temperatures or humidity such
as the bathroom, sauna, bedrock bath or
greenhouse. (This can lead to rust or damage.)
Locations where there may be a lot of dust.
(The clock may stop if air dust accumulates inside
the machanism.)
Locations where there is strong magnetism such
as next to a TV, electronic office equipment, or
audio equipment. (The clock may speed up, slow
down or stop due to the magnetism.)
Locations with a lot of gas such as swimming
pools or hot springs.
Locations where it may be subject to vibration such
as in a car, on a boat or at a construction site.
Locations where large quantities of oil are used,
such as a kitchen. (The clock may stop or be
soiled if oil sprays onto the case or mechanism.)
Direct contact with rubber or polyvinyl chlorides
for long periods may cause the product to stain,
stick or deteriorate.
Location that lasts for a long time in very dry and
humid conditions.
Outdoor.
Incorrect care of this clock may result in loss
of lustre or fading. Please observe the following
care instructions.
Do not scrub or rub the surface
of the case excessively.
Do not use bleach, detergent, wax,
chemically treated cloth, benzine,
thinner, alcohol, or spray cleaner to
clean the case.
Usable Temperature
and Humidity Range:
Time Accuracy:
Alarm Accuracy:
Alarm Sound:
Snooze function:
Auto stop function:
Light function:
Power Source:
Battery Life:
-10 to 50°C (+14 to +122°F), below 85%RH *Avoid condensation
Average monthly difference within ±20 seconds
(when used at temperatures between 5°C(41°F) and 35°C(95°F)
±5 minutes to the set alarm time.
Electronic sound (Sound increases in 4 steps)
Alarm sound pauses for about 5 minutes
Alarm sound stops automatically in about 5 minutes
1 light bulb
AA manganese battery R6P (1.5V)
or AA alkaline battery LR6 (1.5V)
Approx. 1 year (When the clock alarm sounds for 30 seconds and the light
turns on for 3 seconds. / For manganese batteries.)
*Alkaline batteries have a long lifetime compared to manganese batteries.
* Product specifications may change without prior notice to make improvements.
* The battery provided has been kept in factory storage so it may last shorter than the specified battery life.
【
Alarm clock 1104CC80
】
Battery specification of this product is manganese batteries or alkaline batteries, of 1.5V.
Please do not use the following batteries for it may result in damage to our product.
It does not support an oxyride dry cell.
Because malfunction may happen to a
machine, please do not use it.
(High-performance battery having high initial voltage)
Because the voltage is low (1.2V),
please do not use the charge-type
battery for our product.
One second is divided into 4 movements. It moves smoothly. (Smooth movement)
Per second, sound occurs. (Go by dividing one second. Stutter sound.)
Function and operation sound of sweep second hand type
Operation sound you hear will vary depending on the situation and environment in which to hang a table clock.
There are differences in the size of the sound operation noise generated from the complete body clock,
because the vibration is in resonance, such as tha wall or frame.
Even those of the same type, there is a difference in sound working individually even if the product. This
is caused by the presence of several factors overlap including the reasons mentioned above.
The inside of the clock so gear structure, even if the function of the clock is operating normally, there are
individual differences, but the number of years has elapsed, the operation noise will increase little by little.
The operation sound you hear from the clock
Please dispose of in accordance with the regulations of your local government area.
Please dispose your clock and batteries separately.
Incorrect care of this clock may result in loss of lustre or fading. Please observe the
following care instructions.
Remove any battery cover.
Remove any insulating parts or paper.
Insert the battery into the battery holder after checking the , side of the battery.
Turn the hand knob to set the time.
①
②
③
④
Be sure to turn the alarm knob in the direction of the
arrow (anti-clockwise) to set the alarm. Please do it
every time when you reset the alarm time. Alarm
time can be set at 10 minute intervals.
Set the alarm time
Turn on the alarm switch
ON: Alarm will sound at the set time.
OFF: Alarm will not sound, or use to turn the alarm off.
Do not use bleach, detergent, wax, chemically
treated cloth, benzine, thinner, alcohol, or spray
cleaner to clean the case.
Do not scrub or rub the surface
of the case excessively.
Check these items first if the product does not appear to be working properly.
Hands knob
Battery holder
Alarm knob
Alarm switch
Hands knob
Light / snooze
button
Battery holder
Alarm knob
Alarm switch
When the clock is hung, the clock or wall may become soiled due to static electrisity so please
clean regularly.
If the product is dirty, wipe clean with a soft cloth. If the product is very dirty, wipe with a soft
cloth slightly dampened with a solution of water and diluted mind detergent. Wipe dry.
Light function
The alarm stops temporarily
/ turns on again (Snooze function)
The light stays on while the light / snooze
button is pushed. (It goes off when you
release the button.)
If you press the “light / snooze button” when the
alarm sound is temporarily paused, it will start
ringing in around 5 minutes.
The snooze function can be used for 30~50 minutes after the time the alarm was set for.
Move the alarm switch to OFF to prevent it from sounding.
Rotating the alarm dial anticlockwise may reduce the accuracy of the alarm and cause
it to sound earlier than the set time.
When the alarm switch is set to ON, the alarm will sound twice a day in the
morning and afternoon. If not in use, turn the alarm OFF.
Due to the structure of the alarm mechanism, it may sound anytime between 5 minutes before
or after the set time.
The alarm volume increases in four steps every five seconds from when it begins sounding.
When the alarm switch is ON, it starts to ring from the set time and stops automatically
after 5 minutes (Auto-stop function).
Please be careful not to apply pressure to this [Knob to move clock hands]. Because it is
linked to the hands of the clock, the load can cause the clock malfunction such as the clock
going slow. (For example, the goods remain fallen, and is in contact with the floor)
If you give a shock to the product, there is a possibility that the battery and the clock
needle is out. In addition, it will be the cause of the clockʼs breaking down, please be careful.
Time accuracy is affected by
temperature which may cause the
time to speed up or slow down.
The battery is inserted incorrectly.
The battery is low.
The alarm switch is OFF.
The battery is low.
Change to a new battery.
Turn the alarm switch ON.
Change to a new battery.
The time is
slow or fast.
The hands
arenʼt moving.
The alarm
doesnʼt sound.
The alarm
doesnʼt sound.
If the time inaccuracy builds up, make sure
to turn the hands knob in the direction of
the arrow to fix the correct time.
Insert the battery after checking the direction.
The conduction of the battery
contact points are not good.
Wipe the surface of the battery contact
points. Also, roll the battery 2-3 times
after inserting it.
・
・
・
・
・
・
If the alarm sound continues for more than 5 minutes, it will stop automatically.
Pressing the “light / snooze button” during the
alarm will pause the sound for around 5 minutes
and then it will start again.