Density and Viscosity meter VDM-250.1 Owner’s Manual
3
1. APPLICATION
The portable Density and Viscosity meter
VDM-250.1 series
(hereinafter:
VDM-
250.1
or
device
) are designed for density, dynamic viscosity and kinematic
viscosity measurements of any pure liquids directly in tanks,
without sampling,
at the depth up to 6 meters. The device allows readings of relative density (see p.
7.3.).
It may be used for qualitative and quantitative control of petroleum products in the
process of production, refining, transportation, storing and trading of petroleum
products.
2. STANDARD COMPLETE
·
Controller with built-in Bluetooth channel for data transfer to PC and
grounding unit;
·
Density/Viscosity/Temperature sensor with cable;
·
Charging device;
·
Carrying case;
·
Manual.
3. WARNINGS & OPERATOR SAFETY
·
Make sure you have read this manual carefully before operating the device.
·
WARNING! Do not charge the battery or open the battery compartment in
explosive zones!
·
WARNING! Do not operate the device in explosive zones without
grounding!
·
WARNING! Potential electrostatic hazard!
·
WARNING! Do not operate the device with mechanical or electronic
defects!
·
The operator of the VDM-250.1 must control good working order of the device
during its maintenance.
·
The device may be refitted and dismantled only by manufacturer or authorized
distributor’s company.
·
At all times use common sense.
·
It is important that only suitably trained personnel operate this equipment, in
accordance with the instructions contained in this manual and with general
safety standards and procedure.
