9
6. OPTION ON DEMAND
6.1. Heating
OFF =
heating off (led: ON)
ON =
heating on (led: ON + LOW)
LOW =
lower temperature (led: ON + LOW)
HIGH =
higher temperature (led: ON + HIGH)
2H =
heating is on for 2 hours (LOW or HIGH), then
turn off automatically.
When activated, the led blinks till the end of the
second hour.
You can stop heating in any time pressing OFF but-
ton.
Usually, heating stops automatically (LOW or HIGH
temperature) after 1 hour from switch on.
The heating works with the pressure of the body, so we do not feel any sensation of heat if it is not stressed
by the weight of a body. It is recommended to always leave a weight laid (for example towels or magazines)
to maintain the minimum temperature.
6.3. Wireless pedal (without cable)
If the table was equipped with a wireless pedal, follow the instruction in § 7.3. Controls for the installation
and proper use.
The wireless pedal works with two AAA batteries: unscrew
the two screws on the plate that is on the top of the pedal
to replace the batteries.
ATTENTION! It is absolutely necessary TURN OFF THE HEATING (OFF) WHEN THE TABLE
IS NOT USED AND AT THE END OF EACH WORKING DAY.
6.2. Remote hand control
On request, the table can be adjusted by a remote hand control already connected and that can be placed
on the side by a magnet.
