11
7.1. Operator
The table is controlled by an operator through the foot control pedal (or the hand control); the operator must
position themselves so as to have complete view of the controlled parts and of the patient.
7. INSTRUCTION FOR USE
WARNING! During the functioning of the table the operator should always remain
in the vicinity of the controls; it is forbidden to leave the table unattended during its
operation.
Operators should pay attention to avoid creating potentially dangerous situations for
their own or other’s safety.
All the people who work on the table must be properly trained on the correct methods
of work and informed about its proper functioning. They also need to be aware of the
parts of this documentation relevant to their work.
7.2. Use of mattress
In order to ensure hygiene and safety to your patients and ensure long life of the mattress, we recommend
you always cover it with a towel/bed cover and disposable sheets of cartene before starting any treatment.
Both the operator and the patient should not wear rings, necklaces, bracelets, watches or other objects that
may damage the mattress.
7.3. Controls
The table can be controlled by a pedal with cable, a wireless pedal or a push-button strip. All controls are
maintained action, that is releasing the control pedal/push-button the motion stops.
HEIGHT ↑
= Maximung height of the table
HEIGHT ↓
= Minimum height of the table
BACK ↑
= Maximum inclination of the backrest
BACK ↓
= Backrest in horizontal position.
SEAT ↑
= Maximum inclination of the tilting (seat+legs)
SEAT ↓
= Seat+legs in horizontal position.
AUT
= Minimum height of the table, with backrest and
seat in horizontal position.
END
= Minimum height of the table, with backrest and
seat slightly inclined, in horizontal relax position.
M1
= Memorized position M1*
M2
= Memorized position M2*
PEDAL WITH CABLE
HEIGHT ↑
HEIGHT ↓
BACK↑
BACK ↑
SEAT ↑
AUT
M1
M2
SEAT ↑
END
H
E
I
G
H
T
B
A
C
K
S
E
A
T
M1
AUT
END
M2
* To memorize the position M1 (or M2): position the height, the backrest and the seat in the desired position,
then press simultaneously AUT button and M1 (or M2) button for 1 second.
