HDMOD
5L
|
1 x HD (in/out) to DVB-T (COFDM)
|
OPERATION MANUAL v1.0
10
4.4.3 - Quick Settings
With this feature you are able to setup several
HDMOD-5L modulators easily and quickly, one
at a time. All you need is to enter the following
parameters, for each of your modulators:
zx w
The output RF channel
zx w
Set the output level by adjusting the mod-
ulator’s attenuator
zx w
Set the Profile No.
The app applies a suitable predefined profile to
the connected device.
The settings are applied to the connected
HDMOD-5L by tapping on the “
Apply” button.
This feature may be used with different mod-
ulator models.
Picture No6
How the quick settings profile works
In an installation all the modulators (or Mux in general) need to have different values
of the following settings to avoid conflict in the automated scan of the TV sets:
Program Nam Service ID TS ID
For that reason, the user must always select a unique Profile number in every mod-
ulator starting from Number #1.
E.g. If we want to install three modulators in a CATV network, in the profile option we
will select:
zx w
Profile
Νο
1
for the
1st
modulator
m
meaning: Program Name = DTV
1
m
meaning: Service ID =
1
m
meaning: TS ID = 224
0
zx w
Profile
Νο
2
for the
2nd
modulator
m
meaning: Program Name = DTV
2
m
meaning: Service ID =
2
m
meaning: TS ID = 224
1
zx w
Profile
Νο
3
for the
3rd
modulator
m
meaning: Program Name = DTV
3
m
meaning: Service ID =
3
m
meaning: TS ID = 224
2
As a result, all the above modulators have different values in the above settings.
