P
.
5
4. Turning on and turning off smoke
• Ensure Power Cord extending from rear of the unit in on position "-" (Dia. 6).
• Shift Smoke On/Off button to on position "-" (Dia. 7) to activate the smoke function.
• Wait about 2 minutes for water absorption by the wick (B). "Smoke" will come out
through the chimney.
• Shift Smoke On/Off button to off position "
O
" (Dia. 8), smoke will stop.
5. Refilling the water tank
• When water inside the water tank runs out to lower
level, there is no smoke and a red light will flash
(Dia. 9).
• Shift Smoke On/Off button to off position "
O
"
(Dia. 8), the red light will go off .
• Refill the water tank with water by repeating
Point (2).
• Shift Smoke On/Off button to on position "-"
(Dia. 7) to activate the smoke function again.
Smoke will start again.
3. Turning on the product
• Locate Power Cord extending from rear of the unit
and shift the button to on position "-" (Dia. 6).
• When activated, lights will illuminate the unit.
(6)
(7)
(8)
(9)
