CAUTION
1. For liquid blasting, the sandblaster has a tendency to leak a little liquid.
It is recommended that leftover liquid should be put back into its container
or disposed to empty the liquid in the storage box.
2. Do not open the storage cap while blasting. The liquid blaster operates in
high pressure and can harm the operator when opened while in operation.
3. Wear protective goggles, gloves, headset and mask before performing this operation
4. Ensure the air compressor is turned OFF and all connections are secured
while setting up the liquid blaster.
3. Follow the operating instructions
below for proper usage of the
sandblaster.
IMPORTANT
Do not let the siphon hose and tube gap be covered by media in the sand tank.
Otherwise, the suction power will be reduced.
2. Load your preferred abrasive or
sandblasting media.
The type of abrasive to use will depend
on the kind of work and result you want
to achieve.
The AS118-2C Features 2 Operating functions: Gravity-Feed and Siphon-Feed
