12
5
DIAGNOSTIC MODE (POWER SUPPLY MODE)
The charger will act as a stable, configurable power supply during vehicle diagnostics, repair and module programming.
Step 1:
Press
to Enter or Exit this Mode.
Step 2:
Press
to Select the desired parameters:
Battery Voltage; Output voltage, Maximum Output Current.
Step3:
Press
to Start or Stop the mode.
Displayed values during diagnostics:
Load percentage:
displays the load on the charger (%)
Current:
displays the output current (A)
Voltage:
displays the output voltage (V)
Watt:
displays the output power (W)
Time:
displays the duration
Output voltage control
:
12~15v (x2 for 24V mode) adjustable
Output Current Control
: 5~150Amp adjustable for the SF150 units / 1-35Amp adjustable for the SF35 units.
6
SHOWROOM MODE (POWER SUPPLY MODE)
Supply power to, and maintain the battery of vehicles in demonstration mode:
Step 1:
Press
to Enter or Exit the mode.
Step 2:
Press
to Select the desired parameter:
Battery Voltage; Output voltage, Output current.
Step3:
Press
to Start or Stop Showroom mode.
Summary of Contents for FLASH Series
