LEMAN RAD260, Instruction Manual, Page: 73 / 87

2
2.0 Final Assembly
2.1 Place legs into motor housing and secure with
hex. Bolt M8x16, spring washer
φ
8 and hex. nut
M8.
2.2 Push rubber feet onto legs.
2.3 Take off both of the Cover rails and fix the in-feed table. 2.4 Attach chip ejection hood to extrusion using the 4
sheet metal screws supplied.
2.5 Put on the out-feed table and press the Clamp,
then lock the two of Lock levers.
EN