23
5. Trouble shooting
Faults which occur while you are using your machine often have simple causes which you should know and should
be able to rectify yourself.
In cases of doubt, please contact our After Sales Service.
Problem
Possible cause
Solution
The machine does not start.
No power supply.
- Check the cable, and the plug.
- Check the fuse.
Mains connection defective.
- Contact our After Sales
Service.
Extension cable too long or cross
section too small.
- Extension cable min. 1.5 mm²,
max. 25 m long.
- For longer cable, cross section
min. 2.5 mm².
The motor has no power or
the vacuuming/blowing is not
efficient.
Collection bag is full.
- Empty the collection bag.
Material is too wet.
- Vacuum/blow dry material.
Turbine is damaged.
- Contact our After Sales
Service.
Vacuum/blow pipe is blocked.
- Remove and clean the pipes.
Machine vibrates heavily.
Machine is damages.
- Contact our After Sales
Service.
- If you are unable to eliminate the error yourself, please contact our After Sales Service.
- Repair, modification and inspection must be must be carried out by a LEMAN Authorized Service Center.
- In the operation and maintenance, the safety regulations and standards prescribed in each country must be
observed.
MODIFICATIONS:
LEMAN Power Tools are constantly being improved and modified to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior notice.
DISPOSAL
Do not dispose of electric tools together with household waste material!
In observance of European Directive on waste electrical and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
GB
