OPERATING STEPS
1
Plug in unit. Turn the power switch on. The power indicator light will
illuminate and the fan will operate.
2
Fill bag with product to be sealed. Center the open end of bag into
the vacuum chamber. Make sure there are no folds or creases in the
sealing area.
6 www.lemproducts.com 877-536-7763
www.lemproducts.com 877-536-7763 7
4
After sealing, the vacuum lid will release. Allow the heating element
to cool while the cool indictor light is illuminated then remove the
sealed bag. Do not attempt to open the lid before the cycle is
complete or you may damage the unit.
3
Press the “start” button. Apply light pressure on the vacuum lid until
the bag begins to collapse. When all air is removed, the MaxVac will
automatically seal the bag.
