background image

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS

WARNING

 - When using electric products, basic precautions should always be followed, including the 

following:

1.

 Read all the SAFETY INSTRUCTIONS before using the product.

2.

 To reduce the risk of injury, close supervision is necessary when the product is used near children.

3.

 Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, in a wet 

basement or near a swimming poor or the like.

4.

 This product in combination may be capable of producing sound levels that could cause 

permanent hearing loss. Do not operate for a long period of time at high volume level or at a level 
that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an 
audiologist.

5.

 This product should be located so that its location or position does not interfere with its proper 

ventilation.

6.

 This product should be located away from heat sources such as radiators, heat registers or other 

products that produce heat.

7.

 The product should be connected to a power supply only of the type described on the operating 

instructions or as marked on the product.

8.

 This product may be equipped with a polarized line plug (one blade wider than the other). This is a 

safety feature. If you are unable to insert the plug into the outlet, contact an electrician to replace your 
obsolete outlet. Do not defeat the safety purpose of the plug.

9.

 The power-supply cord of the product should be unplugged from the outlet when left unused for a 

long period of time. When unplugging the power-supply cord, do not pull on the cord, but grasp it by 
the plug.

10.

 Care should be taken so that object do not fall and liquid are not spilled into the enclosure through 

openings.

11.

 The product should be serviced by qualifi ed service personnel when:

A.

 The power-supply cord or the plug has been damaged;  or

B.

 Objects have fallen, or liquid has been spilled into the product;  or

C.

 The product has been exposed to rain;  or

D.

 The product does not appear to operate normally or exhibits a marked change in performance;  or

E.

 The product has been dropped or the enclosure damaged.

12.

 Do not attempt to service the product beyond that described in the user-maintenance instructions. 

All other servicing should be referred to qualifi ed service personnel.

13. WARNING

 - Do not place objects on the product's power cord or place it in a position where anyone 

could trip over, walk on or roll anything over it. Do not allow the product to rest on or to be installed over 
power cords of any type. Improper installations of this type create the possibility of fi re hazard and/or 
personal injury.

SAVE THESE INSTRUCTIONS

The lightning flash with arrowhead symbol within an 
equilateral triangle is intended to alert the user to the 
presence of uninsulated "dangerous voltage" within the 
product's enclosure, that may be of sufficient magnitude to 
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the 
literature accompanying the appliance.

Summary of Contents for Cyclop EWT











Reviews: