LELY Splendimo 320 M, Operator'S Manual, Page: 33 / 50

5.3 Corrective Maintenance
5.3.1 Remove and Install a Mower Knive
• Requirements:
• Lely Knive Change Tool
• Splendimo clip
If a mower knife is not installed correctly it can cause injury
to people and damage to objects.
Always use a new Splendimo clip when you replace a mower knife.
Always replace, or reverse the two knives of a mower disc at the same time.
If only one knife is replaced or reversed the disc will not be balanced and may
cause vibration and damage to the mowing unit.
Mower knives have two cutting edges. When one edge is worn, the knife
can be reversed so that the second edge can be used.
1. Remove any dirt from the mower disc.
2. Turn the mower disc so the knife pin is above the hole in the skid.
3. Put the fork of the Lely Knive Change Tool behind the Splendimo clip
(1).
4. Pull the Lely Knive Change Tool downward to release the Splendimo
clip from the lock (1).
5. Remove the Splendimo clip (2).
The tip of the Lely knive change tool can be used to remove the knife pin
if it is stuck.
6. Remove the knife pin (2).
7. Examine the knife pin for wear.
8. If the knife pin is worn, replace the knife pin.
9. Remove the mower knife.
10. If you want to use the other side of the mower knife, reverse the mower
knife.
11. If you do not want to use the other side of the mower knife:
1. Discard the old mower knife.
2. Examine the rotation of the mower element.
3. Install a right hand mower knife for a right hand rotation mower
element.
4. Install a left hand mower knife for a left hand rotation mower
element.
12. Put the mower knife in front of the hole on the bottom of the mower disc
(3).
13. Put the knife pin trough the hole of the mower knife and the hole of the
mower disc (4).
14. Install the new Splendimo clip on the knife pin (4).
DANGER
WARNING
CAUTION
Note:
Note:
Maintenance 5-9
M-H026.1004EN