LELY 5.4008.0020.0, Operator'S Manual

Page: 57 / 90

5.4008.8520.0
-
Operating Instructions 6-11
6.4.3.3 Drive the Machine to the Water Filling Station
1. Connect the Lely Control Plus app to the machine (see Connect the Lely Control Plus app to the
Machine on page 6-7).
2. Slide the switch to the left ( ) to take the machine out of operation.
3. Tap the menu Manual Control .
4. Make sure the sprinkle system is OFF. ( )
5. Manually drive to the wall where the water station is located. Stop at a distance of 1 – 3 m. from the
water station to give the machine the opportunity to reach the wall in time (see Manually Drive the
Machine to a Location on page 6-8).
6. Tap on or , depending on the positioning of the wall.
The machine will stop automatically when it reaches the water station and starts filling its water bags.
The machine will not leave the water station automatically after completing the filling.
Any following actions must be controlled manually.
6.4.3.4 Manually Start a Route
1. Connect the Lely Control Plus app to the machine (see Connect the Lely Control Plus app to the
Machine on page 6-7).
2. Slide the switch to the left ( ) to take the machine out of operation.
3. Make sure the machine is at the charger in the correct direction before starting a route manually. If it is
not standing at the charger, drive it there or wait for the machine to finish the current route (see Drive
the Machine Back to the Charging Station on page 6-10).
4. Tap the menu Routes .
A list of available routes appears.
5. Tap the button on the line of the route you want to start.
in n o vato rs in ag ric u ltu re