Lelit Kate PL82T, User Manual, Page: 27 / 183

Lelit Espresso - English
EN
27
The coffee grinder does not grind coffee
Dirty grinding blades (oils and fats deposits of
coffee residues).
Carry out the grinding blades cleaning, see
the user manual (Cleaning of the mills) for the
opera-ting instructions.
The grinding blades are too close, they are
touching.
Adjust the setting to obtain a coarser grinding.
Grinding blades worn Contact the service center
Foreing objet that blocks grinding blades Contact the service center
The grinder stops due to the motor overheating
The grinder has worked for a long time in
continuous, causing an overheating of the
motor.
Wait until the motor cools down (15-30min.)
before switching on again the grinder.
Alarms shown on the display
There is no water into the tank On the display the following icon appears:
Remove the water tank from its housing.
Fill the tank with water at room temperature.
Reposition the tank in the housing
The temperature probe is in short circuit (or
the detected temperature is above 200°C), all
the machine functions will be disabled.
On the display the following icon appears:
Contact the service center
The temperature probe is faulty or
disconnected all the machine functions will be
disabled.
On the display the following icon appears:
Contact the service center
The grinder has exceeded the maximum time
of grinding in continuous. (20 seconds)
On the display the following icon appears:
After a waiting time of 100 seconds, the
grinder will automatically reset.
7
8
9