11.
To adjust the front brakes you will need a
10mm spanner
, firstly,
loosen the brake pads and located them so they are perpendicular to
the rim surface, and tighten the brake pad bolt.
12.
Then move to the cable adjustment, again using the
10mm spanner
loosen the bolt holding the cable in place and adjust to the desired
tension, re-tighten bolt and pull the brake lever hard a few times to
check everything is securely tightened.
13.
Re-do the previous stem if there is too much slack in the cable, or if
the cable is too tight.
14.
For the rear brake, there is a barrel adjuster located at the front of the
roller brake, loosed the 10mm lock nut and tension the cable accordingly
with the barrel adjuster.
15.
Re-tighten lock nut
and pull the brake lever a few times to check
everything is correctly secured.
CHAPTER 4
IMAGES
Chapter 4
Brake Adjustment
11
MANUAL LEKKER BIKES / Jordaan Women
MANUAL LEKKER BIKES / Jordaan Women
12
(From LEFT to RIGHT, images follow the order of instructions.)
11.1
11.2
12.1
12.2
12.3
