MANUAL LEKKER BIKES / E-Jordaan
15
CHAPTER 6
Turning on your E-Jordaan
and charging
21.
You are now ready to ride your
E-Jordaan!!!
Please
remember to regularly
check your pedals
and all bolts
are correctly tightened, and to service your bike regularly
so you can enjoy it for many years to come!
The Cla
ss Of
MANUAL LEKKER BIKES / E-Jordaan
CHAPTER 6
Turning on your E-Jordaan
and charging
We know you are excited to try your E-Jordaan for the first time!
You‘re nearly there, just a few more steps before it’s ready to go!
19.
Before turning on your E-Jordaan, we recommend doing this
whilst sitting on the bike
, this allows full control over the bike and
can avoid accidents. To turn your E-Jordaan on, using the control
module found on the
left hand side
of your bar, press the
“menu”
button for a few seconds to
turn on
your screen, once turned on,
you can then cycle through the assist modes using the arrow
buttons on the control module. For more in-depth instructions for
your screen, please refer to the manufacturer's manual, found in
PDF format online
.
PLEASE NOTE:
when turning on your screen,
please ensure the brake levers are
free and not engaged
, as this
will show an error code on the screen. We also recommend always
using as
s
ist
level 1
for starting, as this will allow better control of
the bike.
20.
All batteries will come with
some charge
, to get the most out of
your battery, you may need to charge it before your first ride, We
recommend that for the first three charges, to charge it for
12hr
cycles
,
PLEASE NOTE:
this will allow the battery to have full
charge capacity.
16
19
19.1
