Congratulations,
You have now successfully installed your LEKKER bikes front carrier and re-located the lamp accordingly. The lamp will shine through the gap of the rack, making you clearly visible while illuminating the LEKKER logo!
Page 1: ...e For the proper installation of the front rack you need to remove the front light from its original holder and attach it to a longer version see picture to the right This holder is unfortunately only available from the 2nd week of August onwards We will ship you the holder separately Once you receive this holder you can install the rack and lamp correctly We recommend waiting with the installatio...
Page 2: ...nder You can now remove the lamp from the bolt Make sure that you do not disconnect the cables Step 2 Before the lamp can be reattached remove it from the original lamp holder using a cross headed screwdriver and a 8mm wrench After attach it to the long black lamp holder that you received with the carrier see next step ...
Page 3: ...ith the mounted lamp onto the bolt before fastening it tightly Step 3 Now attach the front carrier stays to the carrier using the provided bolt nut and washers Step 4 To attach the stays to the fork first remove the bottom black bolt using a 4mm allen key After attach the carrier stays by inserting and tightening this bolt again ...
Page 4: ...s You have now successfully installed your LEKKER bikes front carrier and re located the lamp accordingly The lamp will shine through the gap of the rack making you clearly visible while illuminating the LEKKER logo ...
