Lekker Bikes AMSTERDAM+ Installation Manual Download

Page: 1 / 4

Front rack installation manual -

This step-by-step manual will guide you through the installment of your
LEKKER front carrier on your Amsterdam GT. You will need allen keys

sizes 4mm and 5mm, a crosshead screwdriver and a 8mm wrench.

Please note: For the proper installation of the

front rack, you need to remove the front light from

its original holder and attach it to a longer version

(see picture to the right). This holder is

unfortunately only available from the 2nd week of

August onwards. We will ship you the holder

separately. Once you receive this holder, you can

install the rack and lamp correctly. We

recommend waiting with the installation of your

front rack until you receive this holder!

Summary of Contents for AMSTERDAM+

Page 2: ...nder You can now remove the lamp from the bolt Make sure that you do not disconnect the cables Step 2 Before the lamp can be reattached remove it from the original lamp holder using a cross headed screwdriver and a 8mm wrench After attach it to the long black lamp holder that you received with the carrier see next step ...

Page 3: ...ith the mounted lamp onto the bolt before fastening it tightly Step 3 Now attach the front carrier stays to the carrier using the provided bolt nut and washers Step 4 To attach the stays to the fork first remove the bottom black bolt using a 4mm allen key After attach the carrier stays by inserting and tightening this bolt again ...

Page 4: ...s You have now successfully installed your LEKKER bikes front carrier and re located the lamp accordingly The lamp will shine through the gap of the rack making you clearly visible while illuminating the LEKKER logo ...