9
F+ Numeral 2
:
L/H
High/low power switch.
F+ Numeral 3:
SAVE
Enable/disable Save function.
F+ Numeral 4
:
STEP
In VFO mode, set frequency
step,optional:2K5/5K/6K25/
10K/12K5/25K
。
F+ Numeral 5
:
REV
In MR mode, enable/disable Reserve.
The channel should set RPT+/RPT-
and offset advanced.
F+ Numeral 6
:
SQT
Squelch mode
,
OFF/CTC/NDCS/IDCS
optional. Refer to attached Table
CTCSS/DCS code.
F+ Numeral 7
:
VOX
Enable/disable Voice Operated
Transmission
F+ Numeral 8
:
FM
Enable/disable FM Radio, Range
:
87.5-108MHz
。
F+ Numeral 9
:
RPT
Repeater Set
,
SING/RPT-/RPT+. Can
only be set in VFO Mode.
F+ Numeral 0
:
ADD
Scan add, in MR/CH mode, current
channel be scanned or not.
F+V/M
In VFO mode, press F+V/M to store
current frequency to memory channel.
Stored channel number can be selected
via
▲▼
key after press F key, press
V/M key to confirm save and exit.
F+ *
Press F+* to start SCAN, in VFO
mode scan by step, in MR/CH mode
scan among channels.
Power ON +V/M
Switch between VFO/MR mode and
CH mode.