15
REPLACING UV BULB
1. The indicator will glow red when it is time to
replace the UV bulb.
2. Remove HEPA filter drum (Fig. A), and use a
screwdriver to remove the 4 screws securing the UV
housing (Fig. I).
3. Gently remove the UV housing (Fig. J).
4. Disconnect the UV bulb from the socket within the
purifier (Fig. K).
5. Your replacement UV bulb (on page 12) will plug
directly into the same socket (Fig. L).
6. Replace the UV housing and use a screwdriver to
tighten the fastening screws.
7. Once the purifier is powered-on, hold the Reset
button until the indicator turns white.
Fig. I
Fig. K
Fig. J
Fig. L
Note: Upon replacement of the UV-C emitter please dispose of at your local WEEE collection facility.
