Leitronic AG EasyAlarm EA-8 DPXM, Start-Up, Page: 23 / 40

7.3 Functional tests
7.3.1 Test call
We advise to start test-call to check functionality of EasyAlarm® before starting operation

6.8.
7.3.2 Test alarms
Although the alarm unit with the exception of the battery is maintenance free, you should check at regular intervals all alarm
functions

8.5, in particular:

Emergency button

Door contact (misuse)

Sensor-1/3 contacts
7.3.3 Routinecall
EN81-28:2018: If no successful routine call has taken place (communication with routine call receiver, DTMF C), this is
signalled by an alternating flashing of the two EN81-70 symbols from version 8.51 on.

The routine call is performed

manually by pressing key
9

6.8.2.2

automatically when routine call is activated (announcement when switching on: Operation mode, supervision)

6.4
From version 8.51 always two hours after switching on, for older versions only after the set time span

9.4, and if the
routine call was activated with
**#1

6.6.4
7.4 Battery check / replacement
Change battery if you hear the following announcement after power-up: or
1. Set Function switch to OFF.
2. Disconnect EasyAlarm® from telephone network, by removing the telephone cord.
3. Open battery cover and remove battery.
4. Insert new battery and close battery compartment.
5. Reconnect EasyAlarm® to the telephone network.
Notes:
 Always use fresh 9V-batteries.
 Dispose the old battery properly.
 Before opening battery compartment you have to disconnect the telephone-line. Otherwise you can get in contact with
telephone network voltage.
 If you use backup supply voltage VIN you do not need 9V-battery. Doing so you can deactivate battery test:
*9713 27 ## *
Value
#
Value Info
0 Battery test activated ( Factory setting )
4
Battery test deactivated
Warning: In case of a supply power down, only calling number 1 can be dialled (emergency operation)
7.5 Maintenance
Shift function switch to OFF and remove telephone cord. Clean EasyAlarm® if necessary using a moistened cloth and dry it
afterwards.
Note:
 Do not use cleaning agents or solvent.
21
Piep,piep,piep Battery error