6
4. SETUP
4.1 Safety instructions
Function switch
must be shifted to OFF and telephone-cord must be disconnected before any wiring
work is done on the AC-adapter or connecting cable.
Adapter wire, telephone wire, motion detector wire are all potential free to 230VAC power supply,
that is no need to power earth.
The EXT/
≂
-jack from
can connect with sensor like motion detector and more
components. Please pay attention according to section 10.
4.2 Installation
must be connected to the analogue telephone line and to the 230VAC power supply. The ideal
location of the alarm-unit is in the centre of the supervised object to obtain best possible connection with the
radio-sensors. Pay attention, the
should be mounted at a high of at least 1 meter to get good
radio reception.
must
not put in cabinet or drawer, because some material (especially metal
shield) can weaken the radio reception.
1. Slide
function switch
to OFF
2. Insert 9V battery into compartment on rear side.
Please note: The telephone cord must be disconnected before opening the battery compartment because
otherwise you can get in contact with the telecommunication voltage!
3. Connect cable of AC-adapter into one of the EXT-ports of the alarm unit and plug AC-adapter to main
socket 230V
Optional wired sensors
Operation with motion detector BBT-PIR-RJ45 => Detail
section 10.1
Operation with alarm contactor => Detail
section 10.2
4. Place motion detector in wanted position, Connect cable to the other EXT-port of the alarm unit
Telephone connection
5. Plug enclosed telephone-cord (5) into
-Line-Jack
of alarm unit and connect it with the telephone network
If you share line with modem/telephone please proceed according to section 9.6
Program calling number(s) => Details according to section 5.1
6. Slide
function switch
to PROG
7. Enter
* * <n>
(selected calling number: Standard
n
= 1..9)
Corresponding calling number will be announced, followed by message “to modify press star“
8. Press
*
and enter calling number
9. Slide
function switch
to OFF
Select user language / record individual message
Details according to section 5.3
10. Shift
function switch
to PROG
11. Enter
* * #
.
Current individual message will be announced followed by “to modify press
*
, to stop press
#
“
12. Select language for user announcements: (facultative)
Press key
1
to
4
to select user languages: 1 for German, 2 for French, 3 for English GB, 4 for Italian
13. Press
*
and start speaking
14. Press
#
to finish recording, max. duration is 12 seconds
New individual message will be announced. You can repeat steps 12 to 14 until text is fine!
15. Shift
function switch
to OFF
Summary of Contents for EA-8-WRL868
Page 39: ...39...