© Leitner 2020
Carefully
connect the black plastic pin on the joystick cable with the groove on the cable on the
wheelchair armrest. Do not use force! Do not damage the metal pins inside the joystick cable! If
they are bent by accident, carefully bend them back with a forceps. Damaging metal pins during
installation is not covered by warranty.
After connecting the wires, move the barrel (arrow) to the centre and turn it in the
direction of the arrow. This will lock the two cables in place and prevent them from
disconnecting by accident. Adjust the wire slack so that the wire is not in the way
while operating the wheelchair.
If your plugs have two white
arrows, line up arrows and
connect the plugs.
