•
Assemble upright marked “A” as shown in the following diagram.
•THREAD TWO M8 X 20 BOLTS INTO THE SHORT T-NUT. DO NOT TIGHTEN AT THIS TIME.
•THREAD ONE M8 X 16 BOLTS INTO EACH ONE OF THE SINGLE T-NUTS. DO NOT TIGHTEN AT THIS TIME.
•
set aside for use in a later step.
V1 | Page 8
ASSEMBLE driver side:
upright “A”
M8 X 14
M8 X 14
{2x} M8 X 20
{2x} SINGLE t-NUT
SHORT t-NUT
