3
6.
Once the buckle straps are on the caravan’s railings, get the caravan cover and
secure
the cover’s bottom loop strap around the front tow.
7.
Then proceed to attach
to
the caravan via the buckle straps that you have threaded
onto
either side of the caravan.
8.
Once all the buckles have been fastened, adjust the buckle straps to securely tighten
the cover onto the caravan. You may need to adjust the buckle’s positioning on the
railing for a secure fit.
When you have successfully attached the cover to your caravan, you can hitch
your caravan to your vehicle.
After Use
To remove the cover, simply unbuckle all of the straps and carefully remove the cover from the
front and place the cover inside the supplied storage bag.
You can leave the buckles on the railing. However, if you are going to park up your caravan during
off-season, then remove the buckles from the railing to prevent them from being worn out.
LED Lights
This product comes supplied with two battery powered LED lights. These LED lights do NOT come
with batteries. They each require 3 x AAA batteries to operate.
To insert the batteries in to the LED lights, remove the reverse panel by rotating the panel anti-
clockwise until it stops, then pull open. Replace the panel once you have inserted the batteries.
To turn on the LED light, simply press the button where the LED light is. Press again to turn off.
