LEISUREWIZE LW676, Quick Start Manual

Page: 7 / 12

7
Operating Instructions
Before First Use
1. Carefully remove the product and its component parts from the packaging.
2. Remove any labels and wipe clean any residue left behind after removing the label.
3. Wash and clean the frying pot and grill with hot water, washing up liquid and a non-
abrasive sponge. Do not use a dishwasher, hand wash only.
4. Clean the main body of the unit using a damp, clean cloth. Warning: Never wash the
main body of the unit using water & washing up liquid and never wash this unit in a
dishwasher.
Set Up
1. Place the product on a level and stable surface. Ensure this surface is heat-resistant.
Important: Never place the unit on a surface that is NOT heat resistant.
2. Ensure there is a 10cm gap at the back and sides of the unit to allow for sufficient ventilation
3. Place the removable pot into the air fryer correctly.
4. Connect the unit to your mains power supply.
Usage
1. Place the ingredients inside the removable pot, then place the removable pot inside the fryer.
2. Set the cooking temperature by pressing the temperature control buttons.
3. Then set the timer via the timer control buttons. Please note: If you’re cooking from frozen,
the cooking time will need to be adjusted accordingly.
4. Once both the timer and temperature have been set, press on the “On” button to start
cooking. In doing so, you will see two icons appear on the display. The fan icon and the
heating element icon. Throughout the cooking process, the fan icon will remain but the
heating element icon will turn on and off during the cooking process to maintain the set
cooking temperature.
5. During the cooking process, you may need to turn the food to ensure all sides colour. To do
so, simply pull the removable pot out of the fryer during the cooking process via the handle.
The fryer will immediately stop the preselected operation, however the temperature and timer
of the last selection will be retained. Depending on the content of the removable pot either
shake or use a pair of tongs to turn over the food. Then, place them back into the fryer.
6. When the timer reaches the end of it’s selected cooking cycle, both the fan and heating
element will switch off.
7. Pull the removable pot out of the fryer, and place on a heat-resistant surface.
8. Check to see if the food is thoroughly cooked, if required, place back in the fryer for more time
accordingly.
9. Remove the food and unplug from the mains, allowing the unit to fully cool before cleaning.