Page 2
CMIII ECO 110628
Figure 7
Operation of the Covermate III Eco
1. Fold the spa cover over on top of itself. While gripping the curved
portion of the Support Arm, motion the spa cover into its vertical and
upright position
2.
Important: when closing the spa cover always make sure to
unlock the Shock by pushing on the orange stop before pulling the
Covermate down to prevent possible lift damage.
Figure 8
P,Q
Black Body
on top
CAUTION!
Do not use the Covermate in high wind condition (greater than 10 m.p.h). Injury
from the spa cover being blown over and impacting the spa user can occur.
ITEM
PART# DESCRIPTION
QTY
A
100900 BRACKET-CMIII ECO - LEFT
1
B
100901 BRACKET-CMIII ECO - RIGHT
1
C
100906 PIVOT ARM-CMIII ECO
2
D
100897 SUPPORT ARM W/RETAINER-CMIII ECO - LEFT
1
E
100903 SUPPORT ARM W/RETAINER-CMIII ECO - RIGHT
1
F
100904 STRAP-CMIII ECO
2
R
100907 DUAL LOCK W/VHB ADHESIVE 6" STRIP
2
G
100835 #10 X 5/8" SELF-TAPPING SCREW, BLACK
6
H
100836 #10 X 1" SHEET METAL SCREW, BLACK
22
I
100837 3/8 X 2.25" HEX CAP BOLT, BLACK
2
J
100838 3/8 NYLON LOCKNUT, BLACK
2
K
100839 3/8 FLAT WASHER, BLACK
4
L
100840 3/8 X 1" NYLON FLAT WASHER, BLACK
4
M
100244 5/16 BALL STUD
4
N
100841 5/16 NYLON LOCKNUT, BLACK
4
O
100895 1/4 FLAT WASHER, BLACK
4
P
100828 SHOCK - 40#
1
Q
100831 LOCKING SHOCK - 40#
1
F/R
Spa cover in upright position on spa
Note:
Strap must be adhered to the furthest edge of the
cover as possible.
Note:
For Strap to adhere properly, clean cover with the
supplied alcohol wipe thoroughly where the Strap
will be adhered to. When area is dry, pull off red
backing on Strap. Pull down on Strap tight to
secure to the spa cover. Wait 15 minutes before
operation of lift.
Position Straps at edge of spa cover
Retainer Clips
