7
BA WELDMAX/ 06.2001/GB
• Only LEISTER accessories should be used
• The tool’s
air filter (10)
should be cleaned with a soft brush or be replaced.
• The nozzle for
extrudate (7)
should be cleaned of welding deposits before every
change of welding shoe.
• Check the mains cable and plug for breaks and mechanical damage.
• At minimal length of the carbon brushes the motor switches off automatically.
The tool should be checked by your Service Centre. The carbon brushes in the
motor will last approx. 1000 hours running time.
• The carbon brushes of the winding motor should be checked after approx. 1000
running time by your Service Centre.
• Repairs should only be carried out by authorized
LEISTER Service Centres
. They
guarantee a specialised and reliable
Repair Service within 24 hours
using original
spare parts in accordance with the circuit diagram and spare parts list.
• Guarantee and liability are in accordance with the guarantee certificate as well
as with the currently valid general business and sales conditions.
• LEISTER Process Technologies rejects any guarantee claims for tools which are not
in their original condition. The tools must never be altered or changed.
Technical data and specifications are subject to change without prior notice.
Your authorized Service Centre is:
GUARANTEE AND LIABILITY
SERVICE AND REPAIRS
MAINTENANCE
ACCESSORIES
®
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland
Tel. + 41 41 662 74 74 Fax + 41 41 662 74 16
www.leister.com [email protected]
