54
Welding speed, air temperature and air volume are monitored continuously.
display (see Section Display symbols of welding temperature [15.5]).
The heating is switched off during the cool down process. The setpoints cannot be changed during the cool down
process.
If the air temperature is more than 60°C when the device is switched on, the device switches to cool-down mode
automatically.
The cool-down process is finished when the air temperature is less than 100°C for 2 minutes.
If the heating is to be switched on again, you must press the
Heating On/Off (31)
button.
16.4 Monitoring welding parameters for runtime
16.3 Cool-down mode
Summary of Contents for UNIROOF 300
