15
7.4 Start UNIFLOOR 500
• Once you have prepared the working area and the UNIFLOOR 500 in accordance with the description, connect
the device to the mains voltage.
• Mains voltage must match the voltage on the nameplate.
• Switch on the device at the
main switch (15)
.
• Now switch on the heating
(Heating “On/Off” button, 31).
After connection, the
start screen
appears briefly on the display of the
operating
unit (2)
with the version number of the current
software release and the device designation.
If the device was allowed to cool down beforehand, this will be followed by a static
display of the setpoints for the most recently set welding parameters.
At this stage, the heating, blower and drive are switched off.
