LeiShen Intelligent System LiDAR C128 Series, Operation Instruction Manual, Page: 46 / 89

LeiShen Intelligent System CO., LTD.
LeiShen Intelligent System CO., LTD.
46
to the same IP when setting the radar IP, otherwise the radar will not work properly ).
Table 1 Default Network configuration
IP Address Port number
Radar 192.168.1.200 2368
Computer 192.168.1.102 2368
The default MAC address of the device is the device serial
number, but the device MAC address can be changed. Change of the
MAC address does not lead to change of the device serial number.
When using a connected device, users need to set the IP address
of the computer to the same network segment as the device, for
example, 192.168.1.x, and the subnet mask is 255.255.255.0. If users
do not know the device network configuration information, please
connect the device and use the wireshark to capture device ARP
packet for analysis after the radar is powered on. For the feature
identification of the ARP packet, see the figure below.