Leigh F1, User Manual

Page: 59 / 116

7-7
Set the depth of cut to slightly greater than
the thickness of the side board
➀
. You
want the drawer front fingers to come
through the side sockets by no more than
1 ⁄
64
"[0,25mm]
➁
for cleanup later, just
like half-blind dovetails.
7-8
Clamp the pin board vertically against the
side stop with the end edge flush under the
template. The inside face
i
of the finished
boards face away from the jig body. With
the scale set on the pin board thickness, the
board should project
1 ⁄
8
"[3mm] in front of
the guide tips
➀
.
7-9
The inside face
i
of all boards used for
making rounded half-blind joints always
face away from the jig body just like half-
blind dovetail boards on the dovetail jig.
So alternate side edges go against the side
stop and boards must all be exactly the same
width.
2
1
1
53