7. Place each end of one chain (J) through each hole
on the right arm (C) and attach the end links to the
eye bolts (F). Repeat for the other side, then securely
tighten the nuts (G) with the wrench (EE).
Hardware Used
EE
Wrench
x 1
7
C AA
C
F
GG
J
GG
J
GG
G
8. Locate a ceiling beam that is sturdy enough to
handle the load of the swing and the occupants
(approximately 500 lbs.). Drill 2 vertical 5/32-inch pilot
holes in the center of the ceiling beam, 50 inches
apart. Insert the set bolts (I) and screw them into the
holes until no threads are exposed.
Note:
Ensure the alignment of the set bolts (I) are
conducive to the intended swinging motion of the
item.
CAUTION:
Incorrect installation of the ceiling hooks
can cause the swing to fall and possibly cause
serious injury to occupants. Be sure to drill the
correct size holes into a sturdy wood beam.
8
Incorrect
Exposed
threads
Correct
No exposed
threads
GG
I
GG
I
9. Hang the chains (J) on the set bolts (I).
9
GG
I
GG
J
