STEP 6:
STEP 4:
Congratulations on your assembly!
C
D
7
6
Optional:
Tighten all Bolts and Screws.
8
E
F
STEP 2:
2P
3
B
B
B
4
1P
1P
Do not fully tighten the bolts.
Connect the Upper Support
(3) and the Lower Support (4)
between the Legs (1) and (2)
by using the Bolts (B x 16).
Slide the Platform (7)
through the Shaft (5), and
secure with the Screws
(Cx4). affix the Cross
Braces (6) on to the legs
with the screws (D x 24).
STEP 3:
C
5
Fit the Shaft (5) between the angles
at the top of the legs: Secure with
the screws (C x 12) provided.
To avoid the wooden legs
cracked, tighten the Clamps (E)
on each end of the legs. Insert
the Stakes (F) into ground to
stabilize the Windmill.
Place the Windmill Head (8) on the
Shaft (5) and tighten Screw to secure
the Windmill Head (8) to the Shaft (5).
STEP 1:
1S
1S
A
A
2S
2S
1P
2P
2P
1P
Start with the Legs by connecting
the Upper parts to the Lower parts
(1P + 2P and 1S + 2S) by using the
Bolts (A x 8).
STEP 5:
Assembling
Separate assembly instructions included in box
with windmill head.
Assemble the Windmill Head (8), make sure the
Stop Nut is screwed on well.
2S
1S
1S
2S
2P
2P
2P
2S
2S
1P
2P
2P
1P
1P
1S
2S
2S
1S
Overhead View
