Step 5:
The keyboard is now successfully connected and will be shown in the list of
the recognized devices.
Note:
The keyboard can be used with all iOS devices which support iOS 4.0 or higher.
For other Bluetooth-enabled devices, please verify the Bluetooth standard & compatibility
before attempting to connect to the keyboard.
Once successfully connected, the keyboard saves all connection data until connected to
another device.
CHARGING THE INTEGRATED BATTERY
When the battery power is low, the power indicator light will start blinking. It is time to
recharge the keyboard.
Step 1:
Connect USB-B of the native USB power cable to the keyboard charging
station.
Step 2:
Put the keyboard into the charging station. You may do this together with the
iPhone 5 case.
Step 3:
The charging indicator light will stay on when the keyboard is charging.
ENERGY SAVING SLEEP MODE
The keyboard will change into sleep mode when it is inactive for 15 minutes and the
keyboard power indicator light will go off. To activate from sleep mode, just press any key
and wait 3seconds. The keyboard will come back on.
If you do not use the keyboard for a longer time, just switch it off by pressing the ON/OFF
switch for about 3 seconds. The Bluetooth indicator shows by flashing twice that it is
switched off.
If you want to switch the keyboard on again, just press the ON/OFF switch for about 3
seconds. The Bluetooth indicator shows by flashing once that it is switched on.
