5
CONNECTION AND OPERATION
Attention: Insert/Extract cable gently.
Step 1:
Please switch all devices off before connecting the converter.
Step 2:
Connect the audio source device (DVD player etc.) via a TOSLINK or coaxial
cable to the converter and the analogue output with a cinch or 3.5mm jack with a suitable
amplifier.
Step 3:
Connect the AV receiver or amplifier with a compatible L/R cable to the converter.
Step 4:
In addition, you can use the headphone out to use the audio signal. The
headphones need a compatible 3.5mm jack. This signal is pre-amplified in the converter and
you can adjust the volume.
Step 5:
To activate the headphone out just push the volume controller a few seconds.
Step 6:
You may now use the converter. Connect with the charger cable to a USB (type
A) port and switch on the source device.
Notes:
To output a digital audio signal the playback device might be set to "digital audio". You may
find such instructions in the producers user's manual.
If the converter is connected to a TOSLINK and coaxial cable simultaneously, the TOSLINK
signal will be automatically preferred.
