CONNECTION AND OPERATION
ATTENTION: To avoid damages to the video system by inrush current, please switch
the amplifier/TV off before installing the Matrix Switch!
Step 1:
Please connect the source devices (DVD player etc.) with the interfaces 1-4 of
the Switch.
Step 2:
Now connect the display devices (e.g. beamer or LCD TV) to the two output
interfaces. Please keep in mind, that the audio interfaces at the back of the
Matrix Switch are connected in parallel to output A. If for example an installation
with an additional amplifier is wanted, it would be best to connect this to output A.
The audio signal will then be put out parallel with the HDMI signal.
Step 3:
Now your sound system can be switched on again, at best in the following order:
source device - Matrix Switch - display device.
Step 4:
When everything is switched on, please choose the source device of your choice
with the included remote control (remove battery protection film!) or with the keys
"A" and "B" at the front of the switch. If a connection was correctly installed, the
Switch will show this with its LED.
Notes:
•
Please keep in mind, that the Switch will always choose the first input when switched
on. Therefore, choose a good order for the connection of your HDMI sources.
•
The audio button at the remote control switches between the analogue audio output
and the optical S/PDIF output for digital audio. To switch the Matrix Switch will
automatically restart.
6
