6. MASTER.VOL-----Adjust the volume of the machine.
7. MULTI.VOL-----Adjust the microphone volume & echo.
1. Turn on the power and insert the microphone into the microphone hole.
2. Prompt or sing into the microphone for amplification.
3. Adjust the machine's reverb knob to achieve the best results.
4. Wireless microphone requires external module and wireless microphone.
Only record the sound source when connect with Microphone, then store in USB or TF card. If
USB and TF card both inserted, then USB priority.
Press " REC" to start the recording, press" REC " again to play the recording.
When connect with MIC, press the
“
MIC PRI
”
button, the LED show
”
ON
”
to weaken the
background sound and enhance the sound from the MIC, press again the LED show
“
OFF
”
to exit the MIC PRI function.
When the battery is charging, the battery indicator on the function panel will show in red, after
full charged, it will turn in Green.When the battery is low, the battery icon on the LED screen
will keep flashing, please recharge it in time.
1. Mute: Press this button to mute the music.
2. MODE: Switch mode to FM/BT.
3. REC: Record music.
4. CH-: Last channel / previous Song
5.
: Repeat a single or all tracks.
6. Digit 0-9: Change the song that was saved on the USB stick/ TF card.
7. REC Play: Play recorded music.
8. VOL+: Turn up the volume.
9. SCAN: Longpress in FM mode to scan the channel. Press briefly to pause the
music.
10. CH+: Next channel / Next song.
11. VOL-: Turn down the volume.
12. LED: Press this key to switch the speaker lighting on/off.
REMOTE
INSTRUCTIONS
REC Function
Microphone Operation
MIC PRI
Charging
