Leica Zeno GG04, Operation
18
3.3.2
Setup with Third-Party Android Mobile Devices
Use
The equipment setup is used for real-time rover with extended periods of use in the
field with a third-party Android mobile device.
Description
This chapter shows a possible pole setup of the GG04 with a third-party hardware and
Zeno Connect to utilise the position in a third-party software.
Connection between the GG04 instrument and the mobile device is made through
Bluetooth. All hardware is fixed on a Leica carbon pole in this example.
• The antenna is mounted directly using screw fitting.
• Carbon fibre poles are used. They can be replaced with their aluminium equivalent
without any change to these instructions.
Equipment setup
Equipment setup
step-by-step
a) GG04
b) GEB212 battery
c) Pole
d) Android mobile device
e) Pole holder
f) Pole clamp
a
b
c
d
e
f
0014102_001
Step
Description
1.
Attach the pole clamp to the pole.
2.
Attach the correct pole holder, depending on the Android mobile device, to
the pole clamp.
3.
Clip the Android mobile device into the pole holder.
4.
Switch on the Android mobile device.
5.
Download and install the Zeno Connect app from the Android app store.
6.
Start the Zeno Connect app.
7.
Insert the battery into the GG04.
8.
Press the ON/OFF key on the GG04 to switch on.
9.
Screw the GG04 to the top of the pole.
10.
On the Android mobile device, select the GG04 in the Zeno Connect app and
connect to the GG04 through Bluetooth.
All manuals and user guides at all-guides.com
