33
Recording
Adjusting the focus after recording
([Post Focus] / [Focus Stacking])
Recording mode:
You can record 4K burst pictures while changing the focus point and then select a focus
point after recording. This function is best for still subjects.
•To record pictures, use a UHS Speed Class 3 card.
•
We recommend using a tripod to perform [Focus Stacking].
•During recording, the angle of view will be narrower.
1
Set the drive mode dial to [ ]
2
Determine the composition and press
the shutter button halfway
•Auto Focus activates and automatically detects the
focus point on the screen. (While the shutter button
is pressed halfway, shaking may be seen on the
screen.)
•If there is no focus point on the screen, the Focus
indicator ( ) blinks and you cannot record.
From halfway pressing the shutter button to completion of recording
•
Do not change the distance to subject or the composition.
3
Press the shutter button fully to start
recording
•The focus point changes automatically while
recording. When the recording progress bar ( )
disappears, recording automatically ends.
•
The data will be saved as a single file in the MP4
format.
•
If [Auto Review] is set, a screen will automatically
appear that lets you select the focus point. (→34)
●
If the ambient temperature is high or [Post Focus] recording is performed continuously, [ ] may
be displayed and recording may be stopped halfway through. Wait until the camera cools down.
Select the focus point and save the picture ([Post Focus])
1
On the playback screen, select the image with the
[
] icon and press