397
CHAPTER 14
■
MEASURING WITH LASER TRACKERS
Figure 14-86.
c
Fi
Fi
Fi
Fi
gure 14-86.
c
5.
You can tell you have a successful connection to both the T-
Scan Controller and the Tracker once you see the Status in-
dicator in the bottom right of the TwinCAT software report
a green connected status. At that point you can close out of
TwinCAT.
Running the T-Scan Interface in SA:
1.
Add the Instrument (Instrument>Add…) and choose the ap-
propriate Leica Tracker (AT901 or AT960)
2.
Start the Interface through the menu Instrument>Run Inter-
face Module and choose Leica TScan. (Do not connect using
the Laser Tracker Interface) (see
Figure 14-87
):
