background image

… the field of vision is in shadow?

• Adjust interpupillary distance and ensure that it is 

correct (p.23).

• Check pupil position (p.23).

… the image will not stay in focus?

• Insert eyepieces correctly (p.16).
• Correct diopter adjustment exactly as described 

(p.28–31).

… the focusing drive slides down or is difficult to turn?

• Adjust tension (p.24).

If you encounter problems with electrically powered
equipment, first check:
• that the voltage selector is set to the correct voltage.
• that the mains power switch is in the ‘on’ position.
• that the mains power cable is correctly connected.
• that all connector cables are correctly connected.
• that none of the fuses have blown.

… the image is too dark?

• Set regulating knob high enough.

Photographs are blurred.

• Focus precisely (p.24).
• Focus on reticles and carry out diopters-correction

exactly according to the instructions (p.30).

• Insert eyepieces all the way in (p.16).
• Check that the reticles are firmly placed in the 

eyepiece (p.18).

No image on the film

• Switch light divider on the photo tube to the ‘Doc’ 

position (p.32).

Special notes

What do I do if …

Remedy

Remedy

Remedy

Remedy

Remedy

Remedy

Leica StereoZoom User Manual

33

Summary of Contents for StereoZoom

















































Reviews: