Leica Sprinter 50 User Manual Download Page 19

EN
DE
FR
ES

NO
SV
FI
DA

IT
PT
NL

16

Safety Directions

Sprinter 50 - 1.0.0en

WARNING

Inadequate securing of the working site can 

lead to dangerous situations, for example in traffic, on 

building sites, and at industrial installations.

Precautions:

Always ensure that the working site is adequately 

secured. Adhere to the regulations governing safety 

and accident prevention and road traffic.

WARNING

If computers intended for use indoors are 

used in the field there is a danger of electric shock.

Precautions:

Adhere to the instructions given by the computer 

manufacturer with regard to field use in conjunction 

with Leica Geosystems products.

CAUTION

If the accessories used with the product are 

not properly secured and the product is subjected to 

mechanical shock, for example blows or falling, the 

product may be damaged or people may sustain 

injury.

Precautions:

When setting-up the product, make sure that the 

accessories are correctly adapted, fitted, secured, 

and locked in position. 
Avoid subjecting the product to mechanical stress.

CAUTION

When using a vertical staff supported by one 

brace there is always the danger of falling, for 

example by wind gusts and therefore danger of 

damage to equipment and danger of personal injuries.

Precautions:

Never leave a vertical staff supported by a brace 

unsupervised (person at the staff).

WARNING

If the product is used with accessories, for 

example masts, staffs, poles, you may increase the 

risk of being struck by lightning.

Precautions:

Do not use the product in a thunderstorm.

CAUTION

During the operation of the product there is a 

hazard of squeezing extremities or entanglement of 

hairs and/or clothes by rotating parts.

Precautions:

Keep a safe distance of the rotating parts.

WARNING

If you open the product, either of the following 

actions may cause you to receive an electric shock.
• Touching live components

Summary of Contents for Sprinter 50



























Reviews: