Leica UK Technical Support Group
RX1250 Real-Time SmartNet Corrections Via a Siemens MC75
Step
Instruction
Screenshots
7
From the CONFIGURE Interfaces screen:
•
Highlight the Real-Time Interface.
•
Press the F3 (EDIT) Button. This
will take you to the CONFIGURE
Real-Time Mode screen.
8
From the Configure Real
-
Time Mode screen:
•
Press the Arrow Key to select Rover
in the R-Time Mode field.
•
Select the settings as shown on the
Real-Time Mode screen on the right.
•
Set the Port field to Net 1.
•
Press F2 Rover to take you to the
CONFIGURE Additional Rover
Options screen.
9
From the CONFIGURE Additional Rover
Options screen:
Configure the settings as shown:
•
Set Accept Ref to Any Received
•
Set Ref Network to MAX
•
Set User ID to No
•
Switch to the NTRIP page, by
pressing F6 (PAGE).
10
From the NTRIP Additional Rover Options
screen:
Configure the settings as shown:
•
Enter YOUR appropriate SmartNet
username and SmartNet password in
the required fields.
•
Enter MAX-RTCMv3 into the
Mountpoint field.
Press F1 twice to return to the Configure
Interfaces screen.
