4
Operation
4.1
Instrument Setup
4.1.1
General Information
The instrument should always be set up on its tripod. Using the tripod spe-
cified for the scanning system guarantees maximum stability during scanning
operations.
☞
Always set up the instrument on its tripod. Do not set up the instru-
ment directly on the ground for scanning operations.
☞
It is always recommended to shield the instrument from direct sun-
light and avoid uneven temperatures around the instrument.
4.1.2
Lightweight Tripod Setup
16152_002
6
5
4
3
2
1
3x
3x
3x
1.
Unlock the locks at the top of the legs.
2.
Unfold the legs so that the locks lock in their maximum position.
3.
Move the legs back to a fixed position so that the locks click into
place.
4.
Unscrew the locking screws and extend the tripod legs to allow for a
comfortable working posture.
☞
Only unscrew the locking screws by half a revolution.
5.
Tighten all locking screws at the tripod legs.
☞
Remove the rubber caps at the bottom of the tripod legs to uncover
spikes for usage on a soft ground.
☞
Do not use the spikes on slippery ground.
6.
Place the instrument on the quick release mount and secure it.
Use the tripod
Instrument setup
step-by-step
Operation
25