EN
17
SCAN MODE
(OBJECT TRACKING)
6 1
6 3
7 2
▸
Press the main switch briefl y
▸
Aim at the object while target mark is lit
▸
Press and hold main switch for approx. 2.5 seconds
• The device switches to scan mode and will then measure
continuously. Scan mode is indicated by a change in the
display. A new measured value appears after approx.
0.5 seconds.
Notes
• In scan mode, the
EHr
EHr
compensation value is shown only after
the fi nal measurement.
• Power consumption is much higher in scan mode than for single
measurements.
