Leica mojo3D Direct Section Control – Amazone
8
5
Controller Configuration
Spray
Equipment
Configuration
1.
Press and hold the I/O
I/O
I/O
I/O button to switch the power on. Wait until the controller starts
with the Menu displayed.
2.
Navigate to the Menu. If you are on the main section control screen then press ESC
ESC
ESC
ESC
to get to the Menu.
3.
Press the Setup
Setup
Setup
Setup button (bottom row right hand button) and confirm the warning with
the
ESC
ESC
ESC
ESC key.
4.
Select the Vehicle Setup
Vehicle Setup
Vehicle Setup
Vehicle Setup button (bottom row right hand button).
5.
Press the Page
Page
Page
Page button to move to the next page on the screen.
6.
Check that the Num of Boom Sections
Num of Boom Sections
Num of Boom Sections
Num of Boom Sections displayed on the matches the
number set on the mojo3D in the Section Control Setup
Section Control Setup
Section Control Setup
Section Control Setup screen.
7.
Enter the Working Width
Working Width
Working Width
Working Width and press the tick (bottom row right hand button) when
complete. Return to the main screen by pressing the ESC
ESC
ESC
ESC key.
8.
Review the Section Control Setup
Section Control Setup
Section Control Setup
Section Control Setup on the mojo3D to ensure the number of sections,
section widths and total implement width are correct.
