Leica M500 N, Service Manual

Page: 55 / 92

Service manual Leica M525 Replacing modules
Doc Code 10 665 751 5-1 04/2004 - EBTH Update 07/2007
5 Replacing modules
5.1 Dismantling / assembling the optics
carrier
5.1.1 Removing motor controller board
1. Remove two screws [Fig.1-1] from counter weight [Fig.1-2] and
take it off
2. Remove seven screws [Fig.1-3] from lower cover [Fig.1-4] and
take it off.
3. Pull out connectors P5 and P6 [Fig.2] from motor controller
board.
4. Separate upper part of zoom [Fig.3-1] from the illuminators
lower part [Fig.3-2], remove screws [Fig.3-3] and [Fig.3-4] until
they no longer engage.
Note: the upper screw [Fig 3-3] is a safety screw.
1
M2.
5x5
2
4
3
M6x12
DIN912
Fig. 1
P 6
P 5
Fig 2
1
Fig 3
M3x10
DIN912
3
2
4
M3x10
DIN553