Assembly
Leica M220 F12 / Ref. 10 716 922 / Version 03 49
1
X
Loosely fasten the cable on the swing arm using the cable tie
(1).
The XY-unit must be able to rotate freely.
2.4 Cabling
2.4.1 Attaching the strain relief for the power cable
3
5
4
2
X
Fasten the power cable (3) to the swing arm using cable ties (5).
X
Connect the footswitch cable (2) and guide it through the cable
guide (4).
2.4.2 Routing the video cable (optional)
X
Guide the video cable through the cable duct (6) of the swing
arm.
Make sure to leave enough cable length at the articulation
points so as not to restrict freedom of movement.
X
Route the video cable alongside the existing electronics cable
and fasten it using cable ties.
